Learn to say popular drone flight controller firmware names correctly.
0 / 5 completed
1 / 5
How is Betaflight (open-source flight controller firmware widely used in racing drones) correctly pronounced?
Betaflight is pronounced 'BAY-tuh-flyt' — 'beta' said the usual English way, plus 'flight'. In a technical interview: "Betaflight let me tune the PID values on the fly, straight from the configurator's slider."
2 / 5
How is ArduPilot (open-source autopilot firmware supporting drones, planes, and rovers) correctly pronounced?
ArduPilot is pronounced 'AR-doo-py-lut' — echoing 'Arduino', plus 'pilot' said plainly. In a technical interview: "ArduPilot flew the entire mission autonomously, from takeoff to a scripted survey grid to landing."
3 / 5
How is PX4 (open-source flight control software widely used in drone and robotics research) correctly pronounced?
PX4 is pronounced 'PEE-EKS-FOR' — the letters 'P' and 'X' spoken individually, plus the number 'four'. In a technical interview: "PX4 exposed a full MAVLink interface, so our ground station could command the drone directly."
4 / 5
How is iNav (open-source flight controller firmware focused on GPS-assisted navigation) correctly pronounced?
iNav is pronounced 'EYE-nav' — the letter 'I' plus 'nav', short for navigation. In a technical interview: "iNav held a stable position hover even in a moderate crosswind, thanks to its GPS-assisted mode."
5 / 5
How is KISS (flight controller firmware known for a simplified, streamlined configuration approach) correctly pronounced?
KISS (the firmware) is pronounced 'KISS' — exactly like the everyday word, one syllable, echoing the 'keep it simple' design principle. In a technical interview: "KISS shipped with almost no configuration required, straight out of the box."